EasyStand - controls

AutoTemp 02e (electric heated kettles)

The heating power is infinitely variable using a dial and water is added to the kettle via a tap. The kettle’s tilt function is operated using keys on the control panel and the steam generator is filled with water automatically.

 An excessive pressure in the kettle or overheating of the heating elements is indicated by a red warning light.

 

 

AutoTemp 03e (steam heated kettles)

The heating power is infinitely variable using a dial and water is added to the kettle via a tap. The kettle’s tilt function is operated using keys on the control panel. 

An excessive pressure in the kettle or overheating of the heating elements is indicated by a red warning light.

 

Option: AutoTemp 11

The display normally shows the actual temperature of the inner kettle, but a keypress gives access to display and alters the temperature setpoint. This is set quickly and precisely between 1-120°C. The large arrows change the setting by 10°C, while the small arrows change the setting by 1°C. The heating power is controlled automatically to ensure that the temperature setpoint is achieved.

 

Water is added to the kettle by pressing the keys on the second line of the display. There is a function for filling while the key is held down and a function for filling until the key is pressed again. The water passes through a large drip-free spout on the pillar.

 

The kettle’s tilt function is operated using keys on the control panel and the TiltBack function means that the kettle will automatically return slightly after tilting is stopped. This minimises overrun during emptying and makes pouring easier.

 

WaterLevelAutomatic ensures that the water level in the kettle’s steam generator is correct. This prevents unnecessary stoppages and also prevents the kettle from boiling dry.

 

Option: AutoTemp 31

The display normally shows the actual temperature of the inner kettle, but a keypress gives access to display and alter the temperature setpoint. This is set quickly and precisely between 1-120°C. The large arrows change the setting by 10°C, while the small arrows change the setting by 1°C. The heating power is controlled automatically to ensure that the temperature setpoint is achieved.

 

The control has an integrated water flow meter and water is added to the kettle by setting the required quantity and starting the filling process. Filling stops automatically when the required quantity of water has been added. The required quantity can be set to one decimal place. The remaining quantity is displayed while the water is being added. The user can easily stop the filling process and adjust the required quantity.

 

Small quantities of water are best added manually. Water is added to the kettle when the key is held down and the quantity added is shown in the display to one decimal place.

 

As a cheaper option, the water flow meter can be omitted and the quantity of water added calculated from an adjustable constant in the user menu. This works best with a stable water pressure. Alternatively, the time during which water is to be added can be set directly in the display in minutes and seconds.

 

The water passes through a large drip-free spout on the pillar.
The timer function stops the heating supply and activates an alarm at a set time or after a set period of time. The time is shown in the display and a visual or audible alarm can be connected if desired.The kettle’s tilt function is operated using keys on the control panel and the TiltBack function means that the kettle will automatically return slightly after tilting is stopped. This minimises overrun during emptying and makes pouring easier.

 

WaterLevelAutomatic ensures that the water level in the kettle’s steam generator is correct. This prevents unnecessary stoppages and also prevents the kettle from boiling dry.

 


 

 

 

 

Max
2,2 kg
 
* Error codes *
383 - 488mm WaterLevel Automatic*
 
*  
* With option AutoTemp 11 only

 

Explanation of symbols